• Overview
• Our factory
• Detailed Photos
• Packaging & Shipping

Overview

Basic Info.

Model NO.	PA6G Yellow
Material	Mc Nylon
Kind	Thermosetting Plastics Pipe
Water Absorption	＜0.01%
Contraction Percentage	＜0.4%
Tensile Strength	81~130MPa
Flexural Strength	88.9MPa
Compressive Strength	124MPa
Rockwell Hardness	109 R
Friction Coefficient	0.363
Wear Loss	0.4mg
Transport Package	1000kgs/Pallet
Specification	D50-2000mm
Trademark	customer requested
Origin	China
HS Code	3920920000
Production Capacity	500 000kgs/Months

Packaging & Delivery

Package Size110.00cm * 110.00cm * 100.00cm Package Gross Weight800.000kg

Product Description

Cast PA6 Tube

Cast Nylon 6 is a common engineering plastic due to its ease of machinability. It combines high strength, stiffness and hardness with good creep and wear resistance. It also has good heat ageing properties, is electrically insulating and is resistant to many oils, chemicals, fuels and cleaning fluids. Chemical ResistanceNylon 6G is highly resistant to: hydrocarbons, alkalis, fats, oils, fuels, ethers, esters and ketones. But it is not resistant to: halogens, mineral acids and certain organic acids, oxidising agents.Dimensional Stability Like most Nylons, 6G will slowly absorb / exude moisture depending on the humidity of the surrounding atmosphere. This has three significant affects; importantly, a component will change dimension so consideration must be given to this e.g. bearing clearances. Electrical insulation properties will change - consider Nylon 12 as an alternative. Usefully, high humidity will toughen Nylon 6G, with significantly higher impact strength being recorded.

Applications

• cushion pads, damping plates, dozer pads, pulleys, wear plates and rollers
• sliding elements, spindle nuts, bearings, bushings, gears and chain conveyor
• chain supporter and wheel guides

Key Features

• Temperature: -40°C up to +100°C.
• Good resistance to wear and creep.
• High strength, stiffness and hardness.
• Good resistance to oils, chemicals and fuels.
• Very low internal stresses
• Good electrical insulator
• Low coefficient of friction
• High degree of crystallinity
• Toughness with high hardness
• Light weight
• Good abrasion resistance
• Good damping properties
• Easy processing
• Can be produced in a wide range of casting weights and dimensions

FAQ

1. Q: What is your delivery time?

A: It depends on the volume, usually it is about 7 days.

2. Q: How can I get a sample?

A: Small size of sample are free, you only need to pay for the shipping cost, or you can provide your UPS, DHL, Fedex, TNT courier account to us. Customized size of sample should be charged.

3. Q: What is your payment ?

A:30% T/T in advance, balance before shipment. Other terms negotiable.

Tube Length (mm):	200-1040
Tube OD (mm):	40-2000
Tube ID (mm):	Manufactured to order
Color	Natural/Black/Blue/Oil Green/MoS2 Filled /Yellow/Red/Gray etc

Our factory

Detailed Photos

Packaging & Shipping